How to Use Lash Lift Kit: Short Guide

There is a proper way to use a lash lift kit. Here you can check out this guide and educate yourself regarding using these lash lifting kits.

Most importantly, if you are using a starter kit, then keep in mind that the kit is included with 30 sachets each of perm solution and neutralizer.

You will be getting Silicone rods perm applicator brush and metal lash lifter tool.

Moreover, the items are included with 5 ml Belma-Remover and also Lash Adhesive Glue. 

Also, to perform this job properly, you will need cotton rounds and too a small bowl filled with lukewarm water.

Step 1:

Before you proceed with this job, do get and buy the best lash lift kit for yourself. You need to select the correct rod size.

This is an essential step to consider so that you can well complete your lash lifting procedure with ease.

For the sake of getting the perfect and ideal lash curls, you have to make sure whether your lashes are covering two third sections of that rod or not!

If you do not follow this tip, there is a chance that you may end up getting too rounded lashes or too curly lashes.

So, choose and opt for the correct rod size so that you may get the desirable look on your lashes.

Step 2:

After that, you have to start collecting the needed tools for effectively performing this lash lifting job. Furthermore, you should use these Collagen Undereye Pads so that your bottom lashes may remain wholly and completely protected.

With the help of these under-eye pads, you get a clean surface and easily lift your upper lashes with a lot of conveniences. 

In this job, Metal Lash Lifting Tool use matters a lot. Note down that this is a precision instrument.

It helps your lashes to get lifted straight and also in an upward direction.

You need to remember this point that you have to lift your eyelashes straight upright onto the rods. 

Avoid sweeping or flaring up your lashes outwards.  If you manage to follow this tip and procedure correctly, then you are going to see that your outer lashes will be able to naturally drop and also flare outwards.

Those who will follow this procedure incorrectly, then there is a high probability that will end up getting twisted outer lashes.

Step 3:

In the third step, you have to start separating your individual’s eyelashes. In this regard, you can apply a good-quality lash adhesive.

Apply this adhesive on your outer lash first and then apply it to your inner lashes.

As soon as you have finished lifting your eyelashes completely onto the rods, then you have to make use of the pointed end of that metal lash lifter tool to separate and also straighten the lashes. 

Also, you have to carry out this step quickly so that your adhesive does not dry out in between this phase.

Step 4:

Moving to the next step and this is about applying a high-end lash lifting solution. Avoid applying solutions anywhere on your lash tips.

Furthermore, you can apply this solution with the help of a brush. This way, you can create and make the perfect “lift” and will not end up getting “perm curl”. 

Step 5:

Now the next step is about removing the lash lift solution! In this step, you have to use a damp cotton pad and start doing upward strokes.

You need to gently and slowly wipe away the solution. While you remove this solution, you have to firmly and securely support the rod with the help of your pinkie finger. 

Step 6:

Once you have removed the solution from your client’s eyelashes, then the next step is to apply the neutralizer.

Apply this specific product for not longer than 5 minutes and then remove it.

Step 7:

The last step is the application of lash tint.

You can gently and smoothly flick your eyelashes in an upward direction with the use of a tint.

Conclusion!

So, what’s the bottom line? This is the basic procedure to use a lash lift kit.

If you have used such lash lifting kits, then share your experience with us.

Leave a Reply

Your email address will not be published. Required fields are marked *

Conociendo Tumente